ARTISHINEVT
Tired Mom Club - 16oz UVDTF Beer Can Glass Wrap
Tired Mom Club - 16oz UVDTF Beer Can Glass Wrap
Regular price
$3.00 USD
Regular price
Sale price
$3.00 USD
Unit price
per
Shipping calculated at checkout.
Couldn't load pickup availability
THIS LISTING IS FOR ONE (1) UVDTF ADHESIVE CUP WRAP ONLY. (GLASS NOT INCLUDED)
You will have to supply your own jar or glass for application. Our wraps are professionally printed with UV ink using a commercial grade printer.
- Premium-quality, permanent adhesive wrap
- Water-resistant and scratch-resistant
- Full-color, UV direct-to-film print with a 3D appearance
- Glossy, smooth varnish finish
- No heat required, just peel and stick!
How to Apply
MAKE SURE SURFACE IS CLEAN BEFORE APPLYING THE TRANSFER
DO NOT PREP THE SURFACE WITH ALCOHOL BEFORE APPLYING THE TRANSFER.
CAN BE USED ON ANY HARD SMOOTH SURFACE
1. Squeegee transfer front and back before use, measure and trim design if needed then with the design facing down peel off the backing.
2. Place the decal on the surface; make sure the design is in your desired position. Please keep in mind that the adhesive is very strong, once it touches the surface you will not be able to change the position.
3. Press the decal down firmly from the center of the glass outward. Be sure to not let the ends overlap. Push out any air bubbles with your hands, or squeegee.
4. Continue to rub all over the design with your fingers, use a squeegee tool if you have one. Rub in the design thoroughly to properly adhere to the surface.
5. Begin to peel clear film off VERY slowly, take your time to avoid any issues! Peeling fast can cause the design to crack.
If there is minor sticky residue you can remove it with alcohol.
